Commodity:
R1234yf Gauge Sets
Features of R1234yf Tools:
1. Anodized alumina valve body, with window, can observe the refrigerant flow condition, valve piston structure and vacuum degree.
2. High quality anti-vibration indicator, accurate reading, can observe the working pressure at the same time
3. Metal handwheel anodized treatment, beautiful and practical.
4. 1/4SAE interface, middle connector with exhaust valve.
5. Three 1.5m filling hoses (red, yellow and blue); Two ZDAC-1234YF adjustable quick connections.
Applicable refrigerant : R1234yf refrigerant, R134a, R410a, etc.
MULTIFUNCTIONAL A/C GAUGE SET--The professional Manifold Gauge Set features a unique design, durable material and accurate readings, it's a perfect tool kit used for auto air conditioner, to evacuation/vacuum, diagnostic check, refrigerant charging and recovery. Package including 1 pc of 3-way a/c gauge, 3 pcs of hoses, 2 pcs of adapters and a customized storage case.
R1234yf Gauge,R1234Yf Gauge Sets,Manifold Gauge Set,R1234Yf Manifold Gauge Set Shenyang Zhongda Huanxin Refrigeration Technology Co., Ltd. , https://www.zdhxrefrigerant.com
At present, China's sewage treatment plants pay more attention to the detection of water quality, and generally have on-line analysis instruments. Influent water quality testing relies on laboratory testing, testing less frequently. However, the influent load is constantly changing, which makes the adjustment of the operating status of the equipment lag behind, resulting in unstable water quality. In order to ensure that the effluent reaches the discharge standard, it generally adopts a conservative “reliable†way of operation, with a certain amount of surplus. This mode of operation is inefficient and wasteful. When the impact load occurs, this mode of operation becomes unreliable, and it is difficult for the discharge water to reach the discharge standard.
The ICA Technology Concept The International Water Quality Association (IAWQ) proposed the concept of ICA technology, namely Instrumentation, Control, and Automation. Through the real-time monitoring of the influent and effluent water quality in the sewage treatment process, such as temperature, pH, ORP, DO, ammonia nitrogen, nitrate nitrogen, phosphorus, sludge interface, sludge concentration, flow rate and other parameters, using the wastewater biological treatment kinetic model , Combining modern control theory such as front (anti-feedback), PID, and self-adaptation, real-time calculation of various settings of factory optimal control, automatic adjustment of oxygen supply intensity, optimization of nitrogen and phosphorus removal, control of pharmaceutical dosage, optimization of row Mud and sludge dewatering process, so as to optimize the control of the entire process. Through real-time monitoring of influent loading, rapid response can be achieved, treatment efficiency can be improved, increasingly stringent sewage discharge standards can be met, system stability can be enhanced, and the impact of shock loads on water treatment systems can be reduced, energy saving and consumption reduction can be realized, and operating costs can be reduced. And carbon emissions.
The core technology of ICA is detection instruments, mathematical models and process control systems. All reliable optimization control strategies are based on effective and accurate detection values. A large number of operating experiences at home and abroad show that, through the monitoring of online water quality analysis instruments, process optimization control of the sewage treatment system can be realized. In some of Europe's leading areas for wastewater treatment technology, a lot of research has been put into place and phased results have been achieved.
PeelCommon Sewage Treatment Plant The PeelCommon Sewage Treatment Plant in southern England is one of the UK's early-stage sewage treatment plants. It has a history of 66 years, serving a population of 250,000 people, with a treatment capacity of approximately 60,000 m3/d, using grade 4 Bardenpho process (in the end of the aerobic area of ​​the traditional AAO process to increase the stop aeration and anoxic area, strengthen denitrification), as shown in Figure 1. 
The real-time control system project of PeelCommon sewage treatment plant was completed by Hach Company and two system integration companies. The idea of ​​this case is to adjust the fixed set value in the past based on the model calculation, thereby reducing the amount of aeration and dosage, saving energy and reducing consumption. In order to meet the needs of optimal control, several Hach dissolved oxygen, nitrate nitrogen, ammonia nitrogen, COD, and MLSS online water quality analyzers were installed. The red box in Figure 2 is the optimized aeration tank. There are two groups of aeration tanks, a total of 8 aeration corridors, about 100m long, 9m wide, 6m deep, and the actual water depth is about 4.5m. 
System Components The entire optimization system includes multiple control strategies:
A dissolved oxygen open-loop and closed-loop control strategy was implemented for groups 1 and 2 of the biochemical pool, and all Hach online water quality analysis equipment was installed. According to the influent ammonia nitrogen concentration, the dissolved oxygen setting value of the four-stage aerobic section was calculated, and according to The effluent ammonia nitrogen concentration was tested. The 7th and 8th groups of the biochemical pool are used as the comparison pool. Only the on-line dissolved oxygen analyzer is installed. The ammonia nitrogen still uses the traditional dissolved oxygen constant PID control strategy. The dissolved oxygen settings in the aerobic 4 zone are 2, 2, and 0.5 respectively. Mg/L (see Figure 3). 
According to the on-line nitrate-nitrogen data of the anaerobic section effluent, a methanol closed-loop control strategy is implemented, and the PID algorithm is used to determine the amount of methanol to be added, as shown in FIG. 5 . 
The above is the control strategy of PeelCommon Sewage Treatment Plant. There are many control strategies in the process. In the phosphorus removal process, the dosage is controlled automatically by the on-line phosphate concentration and flow rate to reduce the cost of flocculating sludge and dosing, as shown in Figure 7. As shown.
In the sludge dewatering control, the dosing amount is controlled by monitoring the concentration of the suspended solids, stabilizing the mud discharge quality, and reducing the dosing cost, as shown in FIG. 8 . 
After comparing the application of optimized data control systems, we have achieved significant social and environmental benefits. According to a rough estimate, after the system is applied, it can save 20% of aeration and save 50% of methanol dosage. More importantly, after the optimization control is applied, the ability of the system to handle the impact load of ammonia nitrogen is improved, the effluent is more stable, and peak clipping is obvious, as shown in Fig. 9, Fig. 10, and Fig. 11. 
Conclusion The online water quality instrument applied to the sewage treatment plant can realize the continuous detection of the water quality, and provide an effective and reliable measurement value for the optimized control, so that the automatic optimization control can operate stably, thereby increasing the processing efficiency and achieving energy saving.
With the continuous improvement of mathematical model of wastewater treatment technology and continuous application of process control theory, wastewater treatment technology has been further developed. With the continuous advancement of on-line detection instrument technology, water quality analysis has become more convenient, faster and more reliable, providing a reliable basis for the realization of optimized control strategies for wastewater treatment plants. The application of ICA technology to optimize more processes, increase the level of management and operation of sewage treatment plants, and meet increasingly stringent emission standards will play an increasingly important role in the future of water treatment processes.
Hash products passed the new standard for on-line residual chlorine analyzer April 6, 2010, Hach Company issued a statement, the company's laboratory-related products are in line with USEPA's new online residual chlorine analyzer measurement standard, method 334.0.
"In November 2009, USEPA issued Standard Method No. 334.0, which emphasizes the requirements for performance reliability testing and quality control of on-line residual chlorine analyzers for the drinking water industry." Hash Labs Product Director ThomVoll said, "The new standard method proposes relevant conditions, technical specifications and acceptance criteria, but it does not involve specific verification methods. To this end, experts in the field of hash drinking have developed a set of tools to help users pass New standard certification."
Application of Online Water Quality Instrument in Energy Saving of Municipal Wastewater Treatment Plant
The annual discharge of urban sewage in China is 35.6 billion tons. With the development of urbanization, the discharge of urban sewage is still increasing. By the end of 2008, there were 1,400 municipal sewage treatment plants throughout the country, and 1,000 municipal sewage treatment plants were still under construction. According to the Outline of China's Environmental Protection Vision, the sewage treatment rate of cities established nationwide in 2010 shall not be less than 60%, and the sewage treatment rate of key cities shall not be less than 70%. To achieve this goal within 10 years will require construction. A large number of urban sewage treatment plants. According to the concentration of nitrate in the vicinity of the outlet water, a backflow ratio control strategy is implemented, and a PID algorithm is used to determine the proportion of the internal reflux so that the concentration of nitrate in the outlet water drops to a set value, as shown in FIG. 6 . According to the concentration of the mixed liquor and return sludge, a sludge discharge/sludge age control strategy is implemented to control sludge discharge, and a PID control algorithm is used to stabilize the mixed-liquid sludge concentration of the biochemical unit at a set value. Data Analysis The ammonia nitrogen discharge standard of the PeelCommon Sewage Treatment Plant is that the ammonia nitrogen effluent concentration is <3mg/L or the ammonia nitrogen removal rate is > 90%. The average effluent ammonia nitrogen was 0.2mg/L. After applying the optimized control system, the average effluent ammonia nitrogen can be increased to 1mg/L without exceeding the standard, which naturally saves the energy consumption of aeration.