What are the maintenance of car spare tires?

What are the maintenance of car spare tires?

For some car owners, long-term driving is caused by tire wear, consumption, and natural causes. Human factors are prone to damage and cannot be used. However, they neglected the maintenance of the spare tire. When the car tire accident occurred and the spare tire was needed, the spare tire could not be used normally, which brought great inconvenience to the owner's travel. Today, Beimai.com has brought you some maintenance considerations for car spare tires, including maintenance and replacement.

汽车备胎的保养

First, the spare tire life is about 4 years

汽车备胎的保养有哪些需要注意的

A lot of car owners think that as long as the spare tire is always used in the trunk, it can be "long life", this is not right. It is often the case that the owner wants to replace the spare tire after the puncture, but finds that the spare tire has been seriously aged after being placed for many years and is already a waste tire.

Second, regular inspection of spare tires

汽车备胎的保养有什么需要注意的

Before routine maintenance or long-distance travel, very few owners test the spare tires, and some unprofessional repair shops often ignore this. The spare tire test is mainly to detect the tire pressure and the presence or absence of loss and cracks. Before the tread loss to the loss mark line, the tire should be replaced as soon as possible.

Third, spare tires should not be applied for a long time

汽车备胎的保养

Due to the low frequency of application and less friction with the ground, and the size of some spare tires will be smaller than the size of the normal tires, the flatness, tire width or tire diameter are not the same as those of normal tires.

Fourth, after repairing the tires put the rear wheel

Some car owners will use the repaired tires as spare tires. If these tires are to be applied again, they must be placed on non-pushing wheels. Usually the intermediate and below vehicles that everyone drives are mostly pioneers, and because of the front tire puncture The direction of the rear vehicle is more difficult to master, so the repaired tires should be placed on the rear wheels.

Fifth, the oil and spare tires should not be put together

汽车备胎的保养有哪些需要注意的

The main component of the tire is rubber, and the rubber is most afraid of the erosion of various oils. If the tire is stained with oil, flush the oil with a neutral detergent on time. According to the size classification, the spare tires can be mainly divided into full-size and non-full-size. There are still some vehicles equipped with explosion-proof tires without spare tires.

These are the relevant introductions about the maintenance of the spare tire for the car brought by Beimei.com . I hope that it will help you. In the usual maintenance of the car, it is necessary to check the condition of the spare tire of the car in time to prevent any accidents. Only in this way can we play a real role when there is a problem with our car tires. Finally, Xiaobian reminds everyone that there is a speed limit for spare tires. Don't accelerate blindly to ensure the safety of driving.


DingZhou YongSheng Grain and Oil Machinery Co., LTD is a professional company combining research and development design, production and sales as a whole. The company has first-class oil equipment manufacturing base, professional oil technology engineer and professor, possesses advanced production technology and sophisticated equipment, All grease equipment and spare parts are produced independently. The whole set of advanced grease equipment, all by my company and the domestic research institutions, professional colleges and universities to develop. Oil advanced technology is suitable for large and small refineries. Advanced technology, suitable for making all kinds of plant oil. From the raw material of cleaning up, prepressing, leaching, refining and the production processing of by-product (such as Phospholipids engineering, protein engineering), is totally a dragon design and production, has created considerable economic benefit and social benefit for the user and society more than 40 years.
In recent years of oil equipment in the company has in the market put hundreds of sets, has been the common recognition of domestic and overseas, our company have hundreds of oil equipment engineering design, production, installation and debugging experience, and according to the design and production requirements of the users.

YongSheng comapny with scientific management method, strives for perfection the manufacturing process, innovative manufacturing idea, fast grows and become the grain and oil machinery production and export base in China. Company products are exported to Russia, India, Nepal, Indonesia, South Africa,Tanzania, Ethiopia, Ukraine, kazakhstan, Pakistan, Iran, north Korea, Vietnam, France and the European Union and so on more than 30 countries and area.


oil mill machine componentsoil and fats equipment components



Oil Press Machine Accessory

Oil Extraction Machine,Screw Oil Press ,Squeezing Bolt ,Heating Ring

Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , https://www.oilpresschina.com